Caco3 Chemical Dosing PVC Auto Weighing And Mixing System For SPC LVT WPC Floor Extrusion

Auto Feeding Dosing Mixing System For SPC/WPC/LVT Floor Extrusion Line

Application and introduction

This system is mainly used for the conveyance of power materials.It can be adopted in the negative pressure and positive pressure(thin phase and thick phase),the dosing of main materials and auxiliary materials,the mixer and the collecting storage.And according to the site situation,it can be adopted the negative pressure or screw conveyance to distribute materials into each hopper.During the whole period,the PLC central control will be adopted and the central monitor on the post as well.

The system will meet the needs of the production art demand and the present condition of the plant house.The annual output is 2000T-100000T.

Characteristic of this system

1.Maximum capacity and efficiency

2.Saving from time

3.Save handwork

4.Additives used in each product provides the same rate and ensures the continuity of product quality.

5.Reduce waste

Automatic Mixing Feeding System Advantage:
1.Automatic feeding system –unmanned

SPC PVC automatic mixing solution is professionally designed for PVC or WPC plastic industry in mixing workplace.This set of confined system is used for automatically measuring,feeding,mixing,dosing to the extrusion of variety powders,particles and liquids.It leads to labor-saving,and prevent from directly touching with powder.

2.Central dust collecting system-dust-free

The mixing workplace of PVC and WPC plastic industry is mass dust and workers are mobile.In the use of centralized feeding system we choose to connect the dust collection with the dust occurring outlet,so that collecting and recycling use of this part.Dust-free workshop is not only the modern industrial standard but also can save a lot of material and labor.

3.The central control system—intelligentize

Intelligent control system is to avoid mistakes and loss caused by manual operation,such as the wrong formula of feeding raw material lead to batches unqualified products and wast of secondary processing.The lack of automatic dosing function would result in short filling,which is the damage to screw and extruder.The key point is that lack of an automatic system to calculate materials based on production.

According to the material wast in enterprise each year,the amount of labor costs and other invisible costs is often higher than the investing amount of a certain small