Automatic PVC Auto Weighing And Mixing System Pvc Compounding Mixer For Extruder Line

PVC Powder Automatic Compounding And Feeding System For Extruder Line

Application and introduction

Description:
PVC automatic compounding and feeding system mainly used for PVC powder material conveying,negative pressure,positive pressure can be used(dilute phase, dense phase),metering(main material,additives),mixing,centralized storage;according to situation on sit,the pipe chain,negative pressure or screw conveying can be used,the material is assigned to each machine hopper.The whole process is centrally by PLC,and centralized monitoring on the host computer.

Characteristic of this system

1.Maximum capacity and efficiency

2.Saving from time

3.Save handwork

4.Additives used in each product provides the same rate and ensures the continuity of product quality.

5.Reduce waste

Automatic Mixing Feeding System Advantage:
1.Automatic feeding system –unmanned

SPC PVC automatic mixing solution is professionally designed for PVC or WPC plastic industry in mixing workplace.This set of confined system is used for automatically measuring,feeding,mixing,dosing to the extrusion of variety powders,particles and liquids.It leads to labor-saving,and prevent from directly touching with powder.

2.Central dust collecting system-dust-free

The mixing workplace of PVC and WPC plastic industry is mass dust and workers are mobile.In the use of centralized feeding system we choose to connect the dust collection with the dust occurring outlet,so that collecting and recycling use of this part.Dust-free workshop is not only the modern industrial standard but also can save a lot of material and labor.

3.The central control system—intelligentize

Mainly include following process of SPC flooring mixing system:

1.Raw materials loading and storaging system
2.PVC resin and Caco3 weighing system
3.additives weighing system
4.Automatic mixing system
5.Storing and conveying system
6.Extruder feeding system

Intelligent control system is to avoid mistakes and loss caused by manual operation,such as the wrong formula of feeding raw material lead to batches unqualified products and wast of secondary processing.The lack of automatic dosing function would result in short filling,which is the damage to screw and extruder.The key point is that lack of an automatic system to calculate materials based on production.

According to the material wast in enterprise each year,the amount of labor costs and other invisible costs is often higher than the investing amount of a certain small